Review





Similar Products

patch clamp micromanipulator  (Scientifica)
86
Scientifica patch clamp micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/patch clamp micromanipulator/product/Scientifica
Average 86 stars, based on 1 article reviews
patch clamp micromanipulator - by Bioz Stars, 2026-06
86/100 stars
  Buy from Supplier
patch clamp micromanipulator patchstar  (Scientifica)
90
Scientifica patch clamp micromanipulator patchstar
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator Patchstar, supplied by Scientifica, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/patch clamp micromanipulator patchstar/product/Scientifica
Average 90 stars, based on 1 article reviews
patch clamp micromanipulator patchstar - by Bioz Stars, 2026-06
90/100 stars
  Buy from Supplier
micromanipulator patch clamp amplifier  (Eppendorf AG)
93
Eppendorf AG micromanipulator patch clamp amplifier
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Micromanipulator Patch Clamp Amplifier, supplied by Eppendorf AG, used in various techniques. Bioz Stars score: 93/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/micromanipulator patch clamp amplifier/product/Eppendorf AG
Average 93 stars, based on 1 article reviews
micromanipulator patch clamp amplifier - by Bioz Stars, 2026-06
93/100 stars
  Buy from Supplier
dual micromanipulator system for patch clamp  (Sensapex Oy)
90
Sensapex Oy dual micromanipulator system for patch clamp
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Dual Micromanipulator System For Patch Clamp, supplied by Sensapex Oy, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/dual micromanipulator system for patch clamp/product/Sensapex Oy
Average 90 stars, based on 1 article reviews
dual micromanipulator system for patch clamp - by Bioz Stars, 2026-06
90/100 stars
  Buy from Supplier
patch clamp scientifica microstar micromanipulators  (Scientifica)
86
Scientifica patch clamp scientifica microstar micromanipulators
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Scientifica Microstar Micromanipulators, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/patch clamp scientifica microstar micromanipulators/product/Scientifica
Average 86 stars, based on 1 article reviews
patch clamp scientifica microstar micromanipulators - by Bioz Stars, 2026-06
86/100 stars
  Buy from Supplier
patch-clamp micromanipulator pcs-5000  (Burleigh Instruments)
90
Burleigh Instruments patch-clamp micromanipulator pcs-5000
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator Pcs 5000, supplied by Burleigh Instruments, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/patch-clamp micromanipulator pcs-5000/product/Burleigh Instruments
Average 90 stars, based on 1 article reviews
patch-clamp micromanipulator pcs-5000 - by Bioz Stars, 2026-06
90/100 stars
  Buy from Supplier
patch clamp micromanipulator  (Thorlabs)
86
Thorlabs patch clamp micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/patch clamp micromanipulator/product/Thorlabs
Average 86 stars, based on 1 article reviews
patch clamp micromanipulator - by Bioz Stars, 2026-06
86/100 stars
  Buy from Supplier
micromanipulator  (Molecular Devices LLC)
99
Molecular Devices LLC micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Micromanipulator, supplied by Molecular Devices LLC, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/micromanipulator/product/Molecular Devices LLC
Average 99 stars, based on 1 article reviews
micromanipulator - by Bioz Stars, 2026-06
99/100 stars
  Buy from Supplier

Image Search Results


Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a micromanipulator. The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].

Journal: Bio-protocol

Article Title: Optogenetic Approach for Investigating Descending Control of Nociception in Ex Vivo Spinal Cord Preparation

doi: 10.21769/BioProtoc.5483

Figure Lengend Snippet: Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a micromanipulator. The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].

Article Snippet: Patch clamp micromanipulator (Scientifica, model: PatchStar) 5.

Techniques: Ex Vivo, Modification